Storage mode of geocomposite drainage network in construction site

Geocomposite drainage network It is a commonly used material in major projects. So, how should it be stored at the construction site?

微信图片_20250607160309

1、The storage site should be selected in an area with high terrain, dry and well drainage. Can prevent rainwater from accumulating and soaking the drainage net, and prevent long-term moisture conduction Causing moldy and deformation of materials. The site should be far away from the emission sources of corrosive substances, such as chemical raw material storage areas, because geotechnical Composite drainage network May be It is damaged by chemical corrosion, which reduces its service life and drainage capacity.

2、The packaging of geocomposite drainage net must be well protected. The original packaging of its products when leaving the factory can provide preliminary protection and prevent transportation and storage External damage during storage. If the original packaging is damaged, it should be repaired or replaced in time, and plastic film with moisture-proof and sunscreen functions can be selected to enter Line secondary packaging.

202504071744012688145905(1)(1)

3、In terms of stacking methods, certain norms should be followed. Pile the geocomposite drainage net neatly Stack,The height of each pile cannot be too high and is generally controlled at 2 – 3m Left and right, so as not to deform the underlying material due to excessive pressure. Moreover, a certain interval should be left between the heap, generally maintaining 0.5 - 1m The distance is the best. Drainage nets of different specifications and models should be stacked separately, and obvious signboards should be set to indicate specifications, quantities and production dates And other information for easy management and access.

4、Temperature and light are also important during storage. The geocomposite drainage net is suitable for storage at normal temperature and cannot be kept at high temperature for a long time Or a low temperature environment. High temperature may cause the material to soften and stick, while low temperature may make it brittle, affecting its flexibility and tensile strength. Intense yang Direct light will accelerate the aging of materials, so it is best to have sunshade facilities in the storage site, such as building awnings or covering them with sunshade nets.

5、It is also important to conduct regular inspections of stored geocomposite drainage networks. Check whether the packaging is in good condition and whether the surface of the material is damaged, deformed or abnormalTaste, etc. If problems are found, timely measures should be taken to deal with them, such as replacing packaging and isolating damaged materials.

 


Post time: Jun-17-2025